We Can "Design For Safety"

Safety in the construction industry has notoriously been considered to be a “Field Issue”. Most design firms have taken an arm’s length approach and have considered the method of construction to be left to the contractor. Design professionals are cautious about being involved in the means and methods of construction fearing liability. Through conversations with other design groups, there is also a perception engineering has very little impact on jobsite safety.

At BlueScope Construction, we believe jobsite hazards can be reduced by the design, detailing, fabrication and delivery of projects. A simple issue such as reducing double handling of a product on a jobsite reduces the chances for harm. A misplaced hole in a structural member whether it is caused by manufacturing or detailing can cause field work and create an additional unnecessary hazard. Material shortage can cause the erector to work around the missing parts and require them to go back later and fill in.

The following are examples of designing to reduce hazards.

  • Use the Sky-Web® fall protection and insulation support system to eliminate leading edge of roof hazard.
  • Provide additional holes in back to back beam connections to eliminate flying connections. (See detail 1)
  • Provide holes in columns 24″ and 45″ above elevated floors for safety cable attachment. (See Detail 2)
  • Add dunnage above and below structural members on trucks to enable the erector to safely unload the truck with forklifts. (See detail 3)
  • Bundle endwall panels in order in which they are to be erected to eliminate the need to be sorted and re-stacked in the field.
  • Design roof beams to set on columns or provide a structural support point for the beam to set on while the connection is made.
  • Provide a stable stone base for the building pad.

All of us can have an impact on reducing jobsite hazards. We do want to include more design improvements into our Design for Safety Program. To achieve the most benefit for safety and financial results we feel a need to include the design for safety into our engineering software. We are open to new ideas for safety improvements so please send us your ideas.

In an attempt to increase our impact of “Design for Safety”, we contacted Dr. Michael Toole, an Associate Professor of Civil Engineering at Bucknell University. Dr Toole initiated and maintains the website Design for Construction Safety (DfCS) and Prevention thru Design (PtD). He has many interesting articles and presentations on the website which he would like to share with all of us in the construction industry. If you are interested please look at his websites: www.designforconstructionsafety.org and www.facstaff.bucknell.edu/ttoole   

The following are quotes from one of his presentations which he shared with us and gave permission to use:

“Research conducted in the U.S., Europe and other regions has shown that design does affect the inherent risk in construction a facility. Doctoral research by Professor Mike Behm at East Carolina State linked design to 22% of injuries that occurred in western states and 42% of fatalities across the country. European researchers found that nearly two-thirds of fatalities and injuries were linked to design. So we know that design does make a difference in construction safety.”

“Implementing Prevention Through Design (PtD) not only is expected to reduce construction site injuries, but also improve construction quality and increase worker productivity. Some revised designs also help improve safety during maintenance and operations of facilities. These derivative benefits provide additional initial and long-term incentive and value to the project owner, designer, and constructor.”

detail1.png  detail2.png

 

Detail 1                                                                               Detail 2

detail3.jpg

      Detail 3